{"product_id":"swellpro-fisherman-fd3-fd1-plus-balance-charger","title":"SwellPro Fisherman FD3 \u0026 FD1+ Balance Charger","description":"Genuine SwellPro 6S LiHV Balance Charger for Fisherman FD3 \u0026amp; FD1+ Fishing Drones\n\u003cp\u003eThe SwellPro Fisherman FD3 \/ FD1+ Balance Charger is the dedicated 6S LiHV fast charger for the 4200 mAh flight battery used by the \u003ca href=\"\/products\/swellpro-fisherman-fd1-waterproof-fishing-drone\" title=\"SwellPro Fisherman FD1+\"\u003eSwellPro Fisherman FD1+\u003c\/a\u003e and FD3 waterproof fishing drones. Designed for Australian drone anglers who run multi-battery fishing sessions, this balance charger delivers safe, adjustable-current charging (0.5–6 A) with automatic cell balancing and 100–240 V AC universal input—ideal for beach, boat and 4WD setups where reliable battery turnaround is critical.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Use the Genuine SwellPro FD3\/FD1+ Balance Charger?\u003c\/h2\u003e\n\u003cp\u003eGenuine SwellPro chargers are purpose-built for the high-voltage 6S LiHV chemistry used in FD3 and FD1+ batteries. Unlike generic LiPo chargers, the SwellPro FD3\/FD1+ charger automatically targets the correct 26.4 V maximum charge voltage and includes integrated cell-balancing circuitry—critical for maintaining battery health, capacity and safe operation over hundreds of charge cycles. Using a generic charger risks undercharging (reduced flight time), overcharging (fire hazard) or cell imbalance (premature battery failure).\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated 6S LiHV balance charging:\u003c\/strong\u003e Automatically charges to the correct 26.4 V peak voltage and balances individual cell voltages for maximum capacity and safety\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable charge current (0.5–6 A):\u003c\/strong\u003e Select slower charging (0.5–2 A) for extended battery lifespan, or fast charging (4–6 A) for quick turnaround between fishing sessions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal 100–240 V AC input:\u003c\/strong\u003e Works with Australian 240 V AC mains and international voltages (suitable for travel or imported power systems)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150 W maximum power output:\u003c\/strong\u003e Fast, efficient charging without overheating—typical full-charge time approximately 120 minutes from empty at maximum current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED indicator panel:\u003c\/strong\u003e Real-time charge status, cell balance progress and fault warnings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver-temperature and over-current protection:\u003c\/strong\u003e Automatic safety cut-off prevents damage to battery or charger in fault conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e6S LiHV Chemistry: What Australian Drone Anglers Need to Know\u003c\/h2\u003e\n\u003cp\u003eThe SwellPro FD3 and FD1+ use 6S \u003cstrong\u003eLiHV\u003c\/strong\u003e (lithium high-voltage) batteries, not standard 6S LiPo. The difference is critical:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard 6S LiPo:\u003c\/strong\u003e Maximum charge voltage 25.2 V (4.2 V per cell × 6 cells)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6S LiHV:\u003c\/strong\u003e Maximum charge voltage \u003cstrong\u003e26.4 V\u003c\/strong\u003e (4.4 V per cell × 6 cells)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCharging a LiHV battery on a standard LiPo charger leaves ~5% capacity unused, reducing flight time. Charging a LiPo battery on a LiHV charger risks overcharging and fire. The genuine SwellPro FD3\/FD1+ charger is factory-configured for 6S LiHV chemistry—no manual settings, no risk of incorrect voltage selection.\u003c\/p\u003e\n\n\u003ch2\u003eAdjustable Charge Current: Balance Speed vs. Battery Lifespan\u003c\/h2\u003e\n\u003cp\u003eThe FD3\/FD1+ charger allows you to select charge current from 0.5 A (slow, gentle) to 6 A (fast). Your choice affects charge time and long-term battery health:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlow charge (0.5–2 A):\u003c\/strong\u003e Gentlest on the battery, extends cycle life, ideal for overnight charging or when you're not in a rush. Charge time: 3–5 hours from empty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced charge (3–4 A):\u003c\/strong\u003e Recommended default for regular use. Fast enough for practical turnaround (~2 hours), gentle enough to preserve battery lifespan. Charge time: ~2 hours from empty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast charge (5–6 A):\u003c\/strong\u003e Maximum speed for back-to-back fishing sessions or tournament use. Charge time: ~90–120 minutes from empty. Use sparingly; frequent fast charging accelerates long-term capacity fade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTip for Australian multi-battery drone fishing sessions:\u003c\/strong\u003e Run three batteries in rotation—one flying, one charging at 4–5 A, one resting. This workflow maximises fishing time while preserving battery health.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 100–240 V AC, 50\/60 Hz (universal; works in Australia and internationally)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage:\u003c\/strong\u003e 25.2 V nominal, 26.4 V maximum (6S LiHV)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum power:\u003c\/strong\u003e 150 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery chemistry:\u003c\/strong\u003e 6S LiHV (lithium high-voltage)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge current:\u003c\/strong\u003e 0.5–6 A adjustable (user-selectable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalance function:\u003c\/strong\u003e Integrated automatic cell balancing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge time (4200 mAh battery):\u003c\/strong\u003e Approximately 120 minutes from empty at maximum current (6 A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndicators:\u003c\/strong\u003e LED charge status, cell balance display, fault warnings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety features:\u003c\/strong\u003e Over-current protection, over-temperature protection, reverse-polarity protection, short-circuit protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e Compact desktop form factor (exact dimensions not published by SwellPro)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Lightweight for portable use (exact weight not published)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Passive cooling with ventilation slots (no fan noise)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility: FD3, FD1+ Only—Not Interchangeable with MAX\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e SwellPro manufactures physically similar chargers for different drone models, but they are \u003cstrong\u003eNOT interchangeable\u003c\/strong\u003e. The FD3\/FD1+ charger is designed exclusively for the \u003cstrong\u003e4200 mAh 6S LiHV\u003c\/strong\u003e battery used by Fisherman FD3 and FD1+. Do not use this charger with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwellPro Fisherman MAX (FD2) — requires the \u003ca href=\"\/products\/swellpro-fisherman-max-fd2-balance-charger\" title=\"Fisherman MAX charger\"\u003eFisherman MAX FD2 charger\u003c\/a\u003e (6S LiPo, higher current)\u003c\/li\u003e\n\u003cli\u003eSwellPro SplashDrone 4 — requires the SplashDrone 4 intelligent battery charger (4S LiPo)\u003c\/li\u003e\n\u003cli\u003eOriginal Fisherman FD1 (6500 mAh battery) — confirm compatibility with DroneFisher before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsing an incorrect charger can result in undercharging, overcharging, or no charging at all. Always match charger model to battery model.\u003c\/p\u003e\n\n\u003ch2\u003eSafe LiHV Charging for Australian Saltwater Drone Fishing\u003c\/h2\u003e\n\u003cp\u003eLithium batteries are safe when charged and stored correctly, but require respect. Follow these practices for every FD3\/FD1+ charging session:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge on a non-flammable surface:\u003c\/strong\u003e Concrete, tile, metal tray or dedicated LiPo charging bag—never carpet, wood or fabric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever leave charging unattended:\u003c\/strong\u003e Charge during active hours when you can monitor progress and respond to faults\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge in a ventilated area:\u003c\/strong\u003e Avoid enclosed cupboards, car boots or airtight containers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect battery before charging:\u003c\/strong\u003e Do not charge a battery that is swollen, damaged, punctured, wet with saltwater or excessively hot from recent flight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse saltwater residue before charging:\u003c\/strong\u003e After beach\/offshore sessions, rinse battery exterior (not connectors) with fresh water and dry thoroughly before connecting to charger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStore charged batteries at 50–60% (storage voltage):\u003c\/strong\u003e If you won't fly for more than 7 days, discharge to ~23 V storage voltage using the drone's motors or a storage-discharge function (if available). Storing at full charge accelerates capacity fade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep a fire extinguisher nearby:\u003c\/strong\u003e A small kitchen dry-powder or CO₂ extinguisher is cheap insurance for any LiPo\/LiHV charging setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCharge Time \u0026amp; Multi-Battery Workflow for Drone Fishing\u003c\/h2\u003e\n\u003cp\u003eThe 4200 mAh FD3\/FD1+ battery takes approximately \u003cstrong\u003e120 minutes\u003c\/strong\u003e to charge from empty at maximum 6 A current. In practice, you'll rarely fully deplete a battery (safe landing requires 20–30% reserve), so typical recharge time is 60–90 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMulti-battery fishing workflow (3 batteries recommended):\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery 1:\u003c\/strong\u003e Installed in drone, fishing (15–20 minutes flight time with bait)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery 2:\u003c\/strong\u003e On charger at 4–5 A (90-minute recharge from 20% reserve)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery 3:\u003c\/strong\u003e Rested and ready as immediate swap when Battery 1 lands\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThis rotation allows continuous fishing with minimal downtime. By the time Battery 3 is depleted, Battery 2 is recharged and ready.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × SwellPro Fisherman FD3 \/ FD1+ Balance Charger (6S LiHV, 150 W, 0.5–6 A adjustable)\u003c\/li\u003e\n\u003cli\u003e1 × AC mains power cable (Australian 240 V plug or universal—confirm with DroneFisher before purchase)\u003c\/li\u003e\n\u003cli\u003eUser manual with charge current selection guide and safety instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Battery sold separately. This charger is compatible only with the SwellPro 4200 mAh 6S LiHV battery used by Fisherman FD3 and FD1+ (\u003ca href=\"\/products\/swellpro-fisherman-fd3-fd1-plus-4200mah-6s-lihv-battery\" title=\"FD3\/FD1+ battery\"\u003eavailable here\u003c\/a\u003e).\u003c\/p\u003e\n\n\u003ch2\u003eComplete Your FD3 \/ FD1+ Drone Fishing Power System\u003c\/h2\u003e\n\u003cp\u003eMaximise fishing time and battery lifespan with these essential accessories:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/swellpro-fisherman-fd3-fd1-plus-4200mah-6s-lihv-battery\" title=\"FD3\/FD1+ spare battery\"\u003eSpare 6S LiHV 4200 mAh batteries\u003c\/a\u003e\u003c\/strong\u003e — run 2–3 batteries in rotation for extended sessions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/bait-release-systems\" title=\"Bait releases\"\u003eWaterproof bait releases\u003c\/a\u003e\u003c\/strong\u003e — PL2-FD and dual releases for FD3\/FD1+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/drone-rigs-terminal-tackle\" title=\"Drone rigs\"\u003ePre-tied drone fishing rigs\u003c\/a\u003e\u003c\/strong\u003e — ready-to-fish paternoster and dropper rigs for Australian species\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiPo charging bag or fireproof case\u003c\/strong\u003e — store and charge batteries safely at home or in the vehicle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery voltage checker\u003c\/strong\u003e — monitor individual cell voltages to detect imbalance or weak cells early\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy Charge Time Matters for Australian Drone Fishing\u003c\/h2\u003e\n\u003cp\u003eAustralian beach and offshore fishing windows are often short—dawn bite, tide change, or a brief weather window between fronts. Fast, reliable battery charging determines whether you fish for 30 minutes or 3 hours. The genuine SwellPro FD3\/FD1+ charger's adjustable current and 150 W power output strike the right balance: fast enough for back-to-back sessions, gentle enough to preserve your expensive batteries over hundreds of cycles.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery \u0026amp; Support\u003c\/h2\u003e\n\u003cp\u003eAustralia-wide shipping. Free delivery on orders over $99. Express metro options available.\u003c\/p\u003e\n\u003cp\u003eNeed help choosing the right charger for your SwellPro drone, or want advice on multi-battery fishing setups? Contact the DroneFisher team—we run FD3 and FD1+ drones ourselves and can guide you through battery management, charge workflows and safe LiHV practices for Australian saltwater conditions.\u003c\/p\u003e]]\u0026gt;","brand":"SwellPro","offers":[{"title":"Default Title","offer_id":49632216776960,"sku":"DF-SWP-0006-01","price":187.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0854\/9063\/0912\/files\/6e1dbdce08324929364798aaa32e007a.jpg?v=1788635946","url":"https:\/\/www.dronefisher.com.au\/products\/swellpro-fisherman-fd3-fd1-plus-balance-charger","provider":"Drone Fisher","version":"1.0","type":"link"}